SPES S1 Adhesive

High-Grade Pro Flex Standard Set

Ultra Tile Fix Pro Flex SPES S1 is a single-part, slow-setting flexible adhesive, designed for wall and floor tiles.

Extended workability, strong adhesion, and flexibility make it ideal for areas with slight movement or vibration.

Flexible & Reliable

Classified as S1 under EN12004, this polymer-modified adhesive tolerates substrate movement while providing a strong, lasting bond.

Suitable for ceramic, porcelain, natural stone, and fully compatible with Living Heat underfloor heating systems.

Quick & Easy to Use

Just add water — no extra additives required. Ready for light foot traffic within 18 hours depending on temperature and substrate. Ideal for large-format tiles and intricate layouts.

Professional or DIY Friendly

Designed for professional tilers but simple enough for competent DIY enthusiasts. All-in-one mix ensures high performance with minimal effort.

Features & Benefits

• General Wall & Floor Installations
• Interior & Exterior Applications
• Wet Rooms / Domestic & Commercial Showers – Cement Backed Trays
• Electric UFH Wire & Mats – Water UFH Systems
• Swimming Pools

• Glass, Ceramic & Porcelain
• Quarry & Terracotta
• Mosaics
• Marble & Slate
• Limestone, Granite & Travertine
• Tile Backer, XPS & Fibre Cement Boards

• Concrete & Brick/Block
• Tile Backer & Fibre Cement Boards
• Sand/Cement Screed & Render (15mm min)
• Solid Wood Floors – Overlayed With Backer Boards
• Plasterboard
• Anhydrite/Calcium Sulphate/Gypsum based Screeds