Wet Room Shower Trays

Our wet room shower trays are insulated, tileable trays with the falls already formed and the drain included in the kit. Choose a linear drain tray, 30mm deep in 13 sizes from 800 x 800mm to 1200 x 1500mm, or a square drain tray with a central or offset drain in four sizes from 1000 x 1000mm to 1200 x 1500mm. Both can be cut down to fit and tiled straight over.

Choosing a wet room shower tray

A wet room tray does the hard part of a level access shower for you. The falls are already formed, so there’s no need to screed a slope into the floor, and the tray sits level with the boards around it so there’s no step into the shower. Tile over it and the water runs to the drain. The first thing to decide is the type of drain.

Linear drain trays

Our wet room shower tray with linear drain is made from XPS insulation board with a cement coating, 30mm deep, in 13 sizes from 800 x 800mm up to 1200 x 1500mm. There are four drain cover options. Option 6 is a tile-in cover, so the tile carries on across the drain for a clean, minimal look, and it can be turned over to give a plain stainless steel finish instead. The kit comes with a fast-flow drain and waste trap.

Square drain trays

Our wet room shower tray with square drain comes in four sizes: 1000 x 1000mm and 1000 x 1250mm at 20mm deep, and 1000 x 1500mm and 1200 x 1500mm at 30mm deep. You can have the drain in the centre or offset, and there are four stainless steel grate designs to choose from. The kit includes the fast-flow drain, and the trays come with a full manufacturer lifetime warranty.

If you only need the drain, our linear shower drain and waste kit works with our 20mm and 30mm tile backer boards.

What size wet room tray do I need?

Measure the area you want for the shower and pick the nearest tray size. If it’s slightly too big, cut it down. Our linear trays cut with a standard Stanley blade, the same as our tile backer boards. Then board the rest of the floor around the tray. Use boards the same thickness as the tray, 20mm or 30mm, so the floor finishes level and you keep level access into the shower.

Underfloor heating in a wet room

The trays are insulated, which cuts heat loss into the floor below, and they’re designed to be used with our under-tile heating systems. That makes a wet room a good place for a warm floor, and it helps the tiles dry off quicker after a shower. Our underfloor heating mats are the usual choice for a bathroom. If you want to know what it costs to buy and run, see our electric underfloor heating cost guide. As with any heating in a bathroom, the connection needs a qualified electrician.

Fitting a wet room shower tray

  1. Prepare the floor and fit the drain bowl supplied with the kit. The tray needs a solid concrete or reinforced timber subfloor.
  2. Fix the tray down with a flexible tile adhesive, fit tile backer boards alongside if you need them, and connect the tray drain to the drain bowl.
  3. Tile over the tray with a flexible tile adhesive, using a good even spread. Keep adhesive out of the drain and bowl.
  4. Once the adhesive has cured, grout as normal.

Waterproofing the shower area

The trays are made to work with our Showerliner wall tanking, tanking tape, and internal and external tanking corners, so you can waterproof the whole shower area with one system.

Planning the whole bathroom? See our bathroom underfloor heating page for the heating, thermostats and boards.

Wet room shower tray FAQs

Is the drain included with the tray?

Yes. Both our linear and square wet room tray kits come with a fast-flow drain and the drain bowl. The linear kit includes a waste trap.

Can a wet room tray be cut to size?

Yes. The trays can be cut down to fit, and you can make up the rest of the floor with tile backer boards.

Can I fit a wet room shower tray on a timber floor?

Yes, as long as the timber subfloor is solid and reinforced. Fix the tray down with a flexible tile adhesive.

Can I tile straight onto the tray?

Yes. Tile straight onto the tray with a flexible tile adhesive. The cement coating on our linear trays gives the adhesive a good surface to grip.

Are wet room trays waterproof?

Yes, the trays are waterproof. Use our tanking tape, corners and Showerliner to waterproof the rest of the shower area.

How deep is a wet room shower tray?

Our linear trays are 30mm deep. Our square trays are 20mm or 30mm, depending on the size.

Not sure which wet room tray suits your bathroom? Send us your measurements or call us on +44 (0)1803 316060 and we’ll help you choose.

Get in touch!

At Living Heat Ltd, we offer a personal experience. That is tailored to get you the right product at the right price.

For more information on any of our products please get in touch, we are here to help.

Call Us

+44 (0)1803 316060

Email Us

sales@livingheat.co.uk

Get A Quote

Can I get a completely free, no pressure Underfloor Heating Quote? ... At Living Heat Ltd we know working out what you need can be a daunting task so let us take the pressure off.

Quick Deliveries
Competitively Priced
Lifetime Warranty
Click & Collect